সাঁচ:Hyphenated word start/doc
 | এইখন এখন সাঁচ:Hyphenated word startৰ নথিকৰণ উপপৃষ্ঠা। ইয়াত থকা ব্যৱহাৰৰ তথ্য, শ্ৰেণী আৰু অন্য সমলবোৰ মূল সাঁচ পৃষ্ঠাৰ অংশ নহয়। |
This document covers both the {{hyphenated word start}} and {{hyphenated word end}} templates, which must be used together as a pair.
The abbreviated forms {{hws}} and {{hwe}} can also be used.
The use of this template is no longer necessary as of september 2018. The software now connects the hyphenated words automatically.[১]
The {{hws}} template appears on the individual page, but its contents are not transcluded into the book when pages are assembled; that is done by {{hwe}}. Therefore, italics must be placed within the template to prevent unwanted bold formatting (see below).
For more specialized usage—if the hyphenated word is part of an HTML link, for instance—see {{linkable phrase start}} and {{linkable phrase end}}.
Usage
সম্পাদনা কৰকThe {{hyphenated word start}} template is used for the beginning of a word that is hyphenated and split between two pages; {{hyphenated word end}} is used for the end of the word. They must be used together: at the bottom of the first page, and at the top of the following page, respectively.
Regular version (using unnamed parameters, 1 and 2)
সম্পাদনা কৰকThe {{hyphenated word start}} template displays param 1 (1st word-fragment) followed by a hyphen (-) in the "Page" namespace, and nothing in the "main" namespace. An optional parameter can be used to change this hyphen to something else, or suppress it entirely.
The {{hyphenated word end}} template displays param 1 (2nd word-fragment) in the "Page" namespace, and param 2 in the "main" namespace.
In both cases, Param 2 (the full-word) is used as the title-attribute for the text; i.e. a tooltip appears, showing the complete word, when you mouseover the word fragments in the "Page" namespace.
Alternate version (using named parameters, "s" and "e")
সম্পাদনা কৰকThe {{hyphenated word start}} template displays param "s" (1st or "start" word-fragment) followed by a hyphen (-) in the "Page" namespace, and nothing in the "main" namespace. An optional parameter can be used to change this hyphen to something else, or suppress it entirely.
The {{hyphenated word end}} template displays param "e" (2nd or "end" word-fragment) in the "Page" namespace, and a concatenation of param "s" and param "e" in the "main" namespace.
In both cases, the full-word (concatenation of params "s" and "e") is used as the title-attribute for the text; i.e. a tooltip appears, showing the complete word, when you mouseover the word fragments in the "Page" namespace.
Examples
সম্পাদনা কৰক| Regular version (copy and paste text below) | |||
|---|---|---|---|
| |||
| Alternate version (copy and paste text below) | |||
| |||
| Page namespace | Transcluded | ||
| Example 1 (start) |
|
||
| Example 1 (end) |
|
anticipation |
anticipation |
| Example 1a (start) |
|
||
| Example 1a (end) |
|
anticipation |
anticipation |
| Example 2 (start) |
|
||
| Example 2 (end) |
|
mother-in-law |
mother-in-law |
| Example 2a (start) |
|
||
| Example 2a (end) |
|
mother-in-law |
mother-in-law |
| Example 3 (start) |
|
||
| Example 3 (end) |
|
anticipation |
anticipation |
| Example 4 (start) |
|
||
| Example 4 (end) |
|
punctuation! |
punctuation! |
Note: in Example 1, you cannot use any blank spaces around the input data ("antici" and "anticipation", or "pation" and "anticipation"). This is due to the Mediawiki implementation of templates: leading and trailing blank spaces are not stripped when using unnamed (numbered) parameters.
Example 1a reproduces Example 1, using the alternate version with named parameters "s" and "e". You can leave blank spaces around the input data ("antici" and "pation") for readability. This is because in the Mediawiki implementation of templates, leading and trailing blanks are stripped when using named parameters.
This alternate version is more compact but less flexible (see Example 2).
Example 2 is a case where the hyphen must not be dropped when the two halves of a hyphenated word are joined together. This is easily handled with the regular version; however, using the alternate version with s and e parameters in the obvious way would give "motherin-law". A workaround, shown in Example 2a, is to hardcode the hyphen into the "s" parameter and use the "hyph" parameter to set the normally-occurring hyphen to blank.
However, there are more general situations where the unsplit word is not merely a simple unmodified fusion of the split halves: cases involving ligatures or variant letterforms in non-English languages, where letters may change their form depending on the surrounding letters; or, German-language hyphenation rules prior to the 1996 orthography reform (bäcker hyphenated to bäk-ker). These can only be handled by the regular version, not the alternate version.
In Example 3 the word is in boldface, and we want the hyphen to be in boldface too. The hyph parameter can be used to accomplish this (the visual difference between a regular hyphen and a boldface hyphen is admittedly barely perceptible).
"hyph" parameter
সম্পাদনা কৰকThe hyph parameter is usually omitted, which results in an ordinary ASCII hyphen (U+002D) being added at the end of the first part of a split word.
- If specified, then the given character (or string of characters) is displayed instead of a hyphen, which could be useful for some situations or for non-English languages: eg, Unicode hyphen (U+2010), Armenian hyphen (U+058A), etc.
- If specified and left blank, then no hyphen at all is displayed. Note: specifying this parameter but leaving it blank is not the same as omitting it.
"Namespace" parameter
সম্পাদনা কৰকThis parameter is only used for special purposes: by setting |namespace=Page you can force the templates to act as though they have been invoked within the "Page" namespace. This can be useful for testing; it is also used within this documentation page to create the examples in the table above.
"title" parameter
সম্পাদনা কৰকThis parameter is normally omitted but may be used to override the tool tip pop up generated in Page: space when the default behaviour becomes problematic (for example any hyphenation component involving additional <span>s can generate invalid HTML.)
Notes
সম্পাদনা কৰকA real world example can be found with the word "approach-ing" at Page namespace Page:Wind in the Willows (1913).djvu/306 and Page:Wind in the Willows (1913).djvu/307; observe also the results in the main namespace at The Wind in the Willows (1913)/Chapter 10.
Invalid invocations are placed into Category:Invalid template invocation.
(There have been problems in the past with spurious blank lines added to main namespace versions with the use of this template. Check the template code history/discussion for the latest scoop.)
Formatting
সম্পাদনা কৰকThere are occasions where formatting is required to the hyphenated word, eg. italics. Due to the means of wiki-coding, it is recommended that formatting be done inside {{hyphenated word start}} and outside of {{hyphenated word end}}, for example,
{{hyphenated word start|''format''|formatting}}''{{hyphenated word end|ing|formatting}}'', alternatively{{hyphenated word end|''ing''|''formatting''}}
TemplateData
সম্পাদনা কৰকUsed to format a hyphenated word or phrase that is split over a page break (in the Page namespace).
| পেৰামিটাৰ | বিৱৰণ | প্ৰকাৰ | স্থিতি | |
|---|---|---|---|---|
| Start | 1 s | The hyphenated half of the word or phrase (without the hyphen).
| ষ্ট্ৰিং | প্ৰয়োজনীয় |
| Full word | 2 e | The full word or phrase (without the hyphen)
| ষ্ট্ৰিং | প্ৰয়োজনীয় |
| Hyphen | hyph | The hyph parameter is usually omitted, which results in an ordinary ASCII hyphen (U+002D) being added at the end of the first part of a split word.
| ষ্ট্ৰিং | প্ৰস্তাৱিত |
| Title | title | This parameter is normally omitted but may be used to override the tool tip pop up generated in Page: space when the default behaviour becomes problematic (for example any hyphenation component involving additional <span>s can generate invalid HTML.) | অজ্ঞাত | ঐচ্ছিক |
| Namespace | namespace | This parameter is only used for special purposes: by setting it you can force the templates to act as though they have been invoked within the 'Page' namespace. This can be useful for testing; it is also used within this documentation page to create the examples in the table above. | ষ্ট্ৰিং | ঐচ্ছিক |
See also
সম্পাদনা কৰকFootnotes
সম্পাদনা কৰক